Push-to-Connect Throttle Valve — 316L Air Line
Push-to-Connect Throttle Valve: stainless flow control for air lines, 4–12 mm / 1/8–1/2 in tube, to 150 psi (10 bar) class. SS304/316. FerruleX RFQ.
- Brand
- FerruleX
- Material
- SS304 / SS316 / SS316L
- Ends
- Push-to-connect / thread
- Tube OD
- 4–12 mm / 1/8–1/2 in typical
- Pressure
- To 150 psi (10 bar) typical pneumatic class
- Stock5–7 days after confirmation
- Make to order15–25 days production
- Payment / termsT/T ~30% or L/C · FOB Shanghai / Ningbo
- OEMLogo and drawings accepted · price on RFQ
Description
Push-to-connect throttle valves meter air on pneumatic tube without a separate needle-valve block. FerruleX SS304, SS316 and SS316L bodies accept common pneumatic tube sizes — 4, 6, 8, 10 and 12 mm and 1/8–1/2 inch — with threads where the valve also ties into a port. Pneumatic push-to-connect service is a low-pressure class: lines and speed controllers commonly run to about 150 psi (10 bar), far below instrument-valve classes. Cylinder speed control and bleed circuits are the usual jobs. Send tube OD, thread and whether you need meter-out or a simple restrictor. FerruleX ships stocked sizes from the factory on RFQ. A throttle valve is not a shutoff — close a ball valve when the line must be isolated. Values are class-typical references for this configuration; tube OD, thread and the series pressure rating are confirmed on the RFQ.
Push the tube to the shoulder before you rely on the collet. Adjust the throttle with the line pressurized only if the knob is designed for live trimming; otherwise set it offline. FerruleX can pair these valves with push-to-connect elbows on the same size list.
- Control
- Adjustable restrictor on push-in tube.
- Sizes
- OD 4–12 mm / 1/8–1/2 in typical; NPT / G / metric.
- Pressure
- To 150 psi (10 bar) class on typical pneumatic service.
Specifications
| Specification | Value |
|---|---|
| Brand | FerruleX |
| Material | SS304 / SS316 / SS316L |
| Ends | Push-to-connect / thread |
| Tube OD | 4–12 mm / 1/8–1/2 in typical |
| Pressure | To 150 psi (10 bar) typical pneumatic class |
Request Quote
Prices stay on the RFQ. Send size, material, quantity and destination — the factory replies with price, lead time and packing.
Shipping & packing
Parts ship in a bag, inner carton and export carton. Large lots can go in a wooden case with a packing list and invoice. Default term is FOB Shanghai or Ningbo. Full notes are on thedelivery page.
Questions buyers ask
What should I send for a quote?
Size, material (SS304, SS316 or SS316L), quantity, end connection and destination. Add a sketch if the two ends are different.
How fast can this ship?
Stocked sizes usually leave 5–7 days after you confirm the quote. Make-to-order runs are about 15–25 days in production, then transit. Name the port if you want CIF.
Can I order a small trial or put my logo on it?
Yes. Trial quantities are quoted, and OEM marking or drawings are accepted. Payment is normally T/T with about 30% deposit, balance before shipment, or L/C at sight.
Related products
Push-to-Connect Straight Fitting
Push-to-Connect Straight Fitting: stainless push-in tube fitting for air/water. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Push-to-Connect Elbow Fitting
Push-to-Connect Elbow Fitting: 90° stainless push-in fitting for crowded bases. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Push-to-Connect Straight Union — Sizes & Specs
Push-to-Connect Straight Union: stainless push-in tube-to-tube union. SS304/316. FerruleX RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →
Push-to-Connect Bulkhead Fitting — Types & Sizes
Push-to-Connect Bulkhead Fitting: panel-pass stainless push-in fitting. SS304/316. FerruleX factory RFQ. Stocked sizes ship fast. Export RFQ only — no cart.
View details →